XS Expansion Loom - #XSL
SKU: 101-0106 Want to add additional inputs/output to your Link Plugin ECU? Use the XS Loom. The Link XS Loom plugs into the expansion connector on all Link G4, G4+ and G4X plug-in ECUs. The number of extra inputs and outputs...
$39.00
Add to Wish List
Plug (CANF)
SKU: 101-0020 Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. 
$25.00
Add to Wish List
Air Temp Sensor (IAT1-8)
SKU: 101-0045 Includes 2-pin Deutsch DTM connector kit Aluminium and steel weld in mounting bosses available 1/8" BSP Thread
$69.00
Add to Wish List
Cable (CANPCB)
SKU: 101-0022 Required to add CAN/Serial communications to G4+/G4X Plugin ECU’s. Plugs directly into ECU PCB header. Use the Link CANF connector (purchased separately) to connect. 
$35.00
Add to Wish List
Mounting Boss (IAT1-8MA)
SKU: 101-0046 Weld in Aluminium boss, 1/8" BSP Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" BSP Thread.
$19.00
Add to Wish List
A Loom Medium - #2LA
SKU: 101-0005 2.5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other....
$149.00
Add to Wish List
CAN Lambda
SKU: 125-1000 Link’s CAN Lambda is an easy to use CAN module that provides digital wideband sensor control via CAN bus and is compatible with leading aftermarket ECUs.  If using the CAN Lambda with a G4+/G4X PlugIn ECU use a Link CANPCB cable...
$335.00
Add to Wish List
Boost Control Solenoid - 3 Port
SKU: 101-0015   More boost? Of course and this 3 port boost control solenoid will help you do it. 3 port boost control solenoids are the go-to for the majority of boost control applications, they allow for precise control of boost and...
$125.00
Add to Wish List
A Loom Long - #5LA
5 m long 'A' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at the other. All...
$169.00
Add to Wish List
Pressure Sensor (PS150)
SKU: 101-0080 Oil or Fuel pressure 10 Bar/150psi 1/8” NPT Thread Includes plug and pin kit Technical Specs and WiringUp to 150 PSI above atmospheric pressure, cannot be used to read vacuum0.5v = 0bar / 0PsiG4.5v = 10 Bar / 145.03PsiG
$185.00
Add to Wish List
Ethanol Content Sensor - #ECS
Looking to run flex-fuel? Then the Ethanol Content Sensor is a must have. The Ethanol Content Sensor measures the ratio of ethanol to petrol in a flex fuel vehicle. Compatible with all current Link Wire-In and Plugin ECU’s. Uses 1...
$219.00
Add to Wish List
B Loom Long - #5LB
5 m long 'B' loom to suit G4, G4+ and G4X ECUsPerfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘B’ Loom has a Link ‘B’ ECU connector at one end and unterminated wires at the other. All...
$169.00
Add to Wish List
3 Bar MAP Sensor (MAP3)
SKU: 101-0164  This Link MAP sensor reads up to 3 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 2.0 Bar (or 29psi) of boost pressure. The wiring pinout for this sensor is...
$109.00
Add to Wish List
Throttle Position Sensor (TPSCW/CCW)
SKU: 101-0100 Throttle Position Sensor. Supports clockwise and counter-clockwise installations. 6 wire flying lead. Wiring instructions are provided in the box.Features 8 mm D-Shaft Rotary Sensor Hall Effect non-contact technology Long life - extremely robust IP68 protection 32mm PCD mounting Redundant output...
$145.00
Add to Wish List
Mounting Boss (IAT1-8MS)
SKU: 101-0047 Weld in steel boss, 1/8" BSP Thread. Suitable for mounting Intake air temperature (IAT1-8), Coolant Temperature sensors (NTC1-8) and other sensors that use 1/8" BSP Thread.
$16.00
Add to Wish List
Air Temperature Sensor (IATB)
SKU: 101-0048 Includes Plug Kit - 2 way Bosch Style plug, terminals and boot Aluminium and steel weld in mounting bosses available (IATBMA & IATBMS)
$69.00
Add to Wish List
Mounting Boss Aluminium (IATBMA)
SKU: 101-0049 Weld in Aluminium Boss. Bosch part. Suitable for mounting the IATB Inlet Air Temperature sensor and other sensors that mount via a Bosch style flange.
$19.00
Add to Wish List
Pin Kit A - #TKA
SKU: 101-0096 Equivalent plug and connectors as "A" Loom. Plug and Pin Kit only.Suitable for:  All Link G4X WireIn ECU’s (Note: Loom B/Pin Kit B will also be required for the Storm/Fury/Xtreme) Link G4+ Atom (NB: Does NOT suit the earlier...
$39.00
Add to Wish List
Link 4 Bar MAP Sensor (MAP4)
SKU: 101-0165 The Link 4 Bar MAP sensor reads up to 4 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 3.0 Bar (or 44psi) of boost pressure. The wiring pinout for this...
$115.00
Add to Wish List
Tuning Cable (CUSB)
SKU: 101-0001 Link CAN to USB Tuning Cable. Used to connect the ECU to a computer via USB. A CAN to Serial cable is also available. Compatible with: Link G4X Storm  Link G4X and G4+ Fury  Link G4X and G4+ Xtreme...
$55.00
Add to Wish List
KnockLink G4 - #G4KNL
SKU: 114-1000 KnockLink is a self-calibrating, visual knock warning tool. The KnockLink is designed for tuning, street and race use. Will require a knock sensor to function (sold separately) or you can purchase the KnockLink Kit that includes the Knock Sensor...
$195.00
Add to Wish List
Knock Sensor with Loom - #KNSB
SKU: 101-0054 Donut style 8mm Knock Sensor prewired with loom, flying leads. Suitable to wire directly to Link ECU or use with the G4 Knocklink Visual Warning Light.
$105.00
Add to Wish List
Wideband O2 sensor (LSU49)
SKU: 101-0116 This sensor can be used with all wide band controllers and ECU’s that support LSU 4.9 sensors. This includes:   Link G4+/G4X Fury and G4+Thunder ECU’s – These have on-board LSU4.9 wide-band control.  Link CAN-Lambda Controller – These are...
$185.00
Add to Wish List
Coolant Temperature Sensor (NTC12)
SKU: 101-0077     Includes Plug Kit - 2 way Bosch Style plug, terminals and boot M12 Thread  
$49.00
Add to Wish List
2.5 Bar MAP Sensor (MAP2.5)
SKU: 101-0163 The Link 2.5 Bar MAP sensor reads up to 2.5 Bar absolute pressure. This means that it is suitable for turbo or supercharged applications running up to 1.5 Bar (approx 22psi) of boost pressure. The wiring pinout for this...
$105.00
Add to Wish List
A Loom short - #0LA
SKU: 101-0002   0.4m long 'A' loom to suit G4, G4+ and G4X Wire-In ECUs Perfect for all custom wiring jobs utilising Link WireIn ECUs. The ‘A’ Loom has a Link ‘A’ ECU connector at one end and unterminated wires at...
$69.00
Add to Wish List
Dual Core Cable - #C2C10
SKU: 101-0033 Dual core screen cable for use with trigger signals and knock sensors - 10m per pack
$45.00
Add to Wish List
Combined Pressure and Temperature Sensor
Two sensors in one - Combined 10 bar (145 psi) Liquid Pressure sensor and -40 to 140 deg C L Liquid Temperature sensor. Suitable for Oil, Coolant, Fuel, Transmission fluid etc. Up to 10.0 bar (145PSI/1000kpa) Pressure Sensor for Liquid...
$149.00
Add to Wish List
G4 KnockLink Kit - Includes Knock Sensor+Loom
SKU: 114-2000 Kit includes the G4 KnockLink visual warning light and a knock sensor with loom. The KnockLink is a self-calibrating, visual knock warning tool. This kit is designed for tuning, street and race use.The G4 KnockLink is the only detonation...
$295.00
Add to Wish List
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
Thanks for subscribing! :) We can't wait to share our cool stuff with you!